Performance Wheel Spacers by Eibach
Made from High-Strength Aircraft-Aluminum Alloy
Precision engineered hub-centric for perfect fit & wheel balance
Strength-tested for all applications
Extreme corrosion protection through DIN 50021 approved coating process
TÜV, QS9000 and ISO9001 certifications
Reduced weight compared to steel wheel spacers
LPI Racing carries Eibach wheel spacers. You'll achieve optimum looks and enhanced handling by moving your wheels flush with the outer edges of the wheel wells. Simply measure the wheel-well/tire gap, as shown here, and order the corresponding wheel spacers to put your wheels and tires out where they belong.
To give your car the final visual and performance touch, Eibach engineers have created a complete line of Eibach Pro-Spacers. These wheel spacers are designed to give your vehicle a wider, more stable stance. They are also a perfect match for the Eibach Pro-Kit or Sportline Lowering Spring Sets. With the right Eibach Pro-Spacers installed, your car takes on a more aggressive look, with the wheels and tires filling the wheel wells exactly the way they should.
Fine-tuning your track width does more than improve your car's appearance. Wheel spacers also provide improved handling performance and optimized roll characteristics.
Pro-Spacers are available in a wide range of sizes, from 5mm to 40mm, allowing tires to be positioned exactly where they will look and perform their best.
Please measure your application and select wheel spacers carefully when ordering online. If you have any questions, please give us a call at 925-292-5522. We have a lot of experience helping customers select the right wheel spacers for their car and we're here to help. Please note that wheel spacers ordered online are not returnable
Note: 15mm is usually the "thinnest" spacer that allows a "centric hub" to be built into the wheel spacer. To verify that the wheels will still contact the OEM-centric hub, measure the OEM-centric hub, subtract the thickness of the wheel spacer, and subtract the depth of the beveled area on your wheel. If you get a negative number, your wheels will only be held in place by the wheel bolts, or wheel studs and some vibration may be noticed.
Example 1: 15mm OEM centric hub - 10mm spacer - 5mm bevel= 0mm of area for the wheel to contact the OEM hub.
Example 2: 15mm OEM centric hub- 5mm spacer - 3mm bevel = 7mm of contact area between the wheel and the OEM hub