Nissan/Infiniti - Roll Bars

Roll Bars & Roll Cages

Overview

With over 35 years experience manufacturing racing and safety equipment, Autopower knows what is required to keep you safe in any competitive situation. Autopower roll bars and roll cages meet or exceed the safety requirements for most competition sanctioning organizations.

Autopower roll bars and roll cages have been designed to install easily and provide maximum protection. The vehicle fit allows quick and easy entry and most importantly, a quick exit, while conforming closely to your interior for a clean, unobtrusive look and feel. All roll bars and roll cages are certified MIG welded and precision jig notched, providing maximum strength and the best fit available.

Every roll bar or roll cage has been designed to fit specific car models so only minor modifications are necessary for installation. Most installations are a true bolt-in and require NO WELDING. Significant time has gone into developing and perfecting each product to offer the utmost in strength and proper fit. Autopower has the engineering capability and experience to produce the equipment you need.

Materials and Safety
Autopower manufactures most roll bars and roll cages from seamless DOM or ERW mild steel tubing. This type of tubing is designed not to break in the event of a crash. It will deflect and bend while maintaining the integrity of the roll bar or roll cage. Adding a roll bar to your car not only provides additional protection, but can substantially add to chassis stiffness, thereby improving the car's handling characteristics.

Roll Bar Installation

All necessary installation and mounting hardware, including backing plates is included.

Installation Tip: Achieve a clean, professional looking installation when installing the roll bar through plastic side panels. Click here

Autopower Paint Finishes
Most steel products are sprayed with an industrial grade gloss black cover coat for rust protection. EXPECT some paint damage during shipping. You may want to refinish products before final installation. It is best to check fit and drill all holes before you repaint. There is NO paint finish guarantee.

• In most cars, rear seats and/or convertible top remain in place and useable.
• This roll bar is made of 1.750 x .120 DOM mild steel tube.

• This roll bar has a bolt-in harness mount tube for easy installation of safety harnesses.
• This roll bar is made of 1.750" x .120 DOM mild steel tube.

Race Roll Bar
With the added strength of a diagonal cross brace, the Race Roll Bar is designed for solo, autocross and high speed time trials. Most Race Roll Bars also include a safety harness bar.

• Autopower will select tube size and type for your application.
• This roll bar is made of 1.750" x .120 DOM mild steel tube.
• Cars weighing more than 3,500 lbs. use 2" x .120 ERW steel.

Race Roll Bar With Options
This 4 point roll bar has a bolt-in diagonal cross brace and harness mount tube.

• Autopower will select tube size and type for your needs.
• This roll bar is made of 1.750" x .120 DOM mild steel tube.
• Cars weighing more than 3,500 lbs. use 2" x .120 ERW steel.
• Optional bolt-in diagonal and harness tube can be ordered for this roll bar.
• Quick and easy installation and removal of these race roll bar options allows for access to the back seat for street use.
• Pictured with Adjustable Seat Brace. (Not included)

Bolt-In Roll Cage
The Bolt-In Roll Cage is designed to quickly and easily transform your street car into a race-legal competition car. This cage closely conforms to your car's interior, allowing quick entry & exit. It uses precision-fit, 6 mounting point, slip-tube and bolt-in design. It is approved by SCCA and NASA for open road racing and drifting events. The best fitting pre-fab roll cage you can buy. All roll cages made to order.

• SCCA & NASA-legal for club racing.
• Top-of-the-line in fit and construction.
• Cages are made to order, allowing for tube size and type to be selected.
• Diagonal cross brace and horizontal brace are a permanent weld-in design.
• Autopower will select tube size and type for your needs.
• Most Bolt-In Cages are made of 1.50" or 1.750" x .120 DOM mild steel tube.
• Pictured with Driver's Safety Net. (Not Included)

• 2 forward support braces
• Top windshield cross tube
• 4 door guardsUnder dash bar
• 4 top corner gussets

Product Notes

When ordering, specify in the "Order Notes" if your car is equipped with a sunroof or other structure that will require modification to the roll bar. Some roll bars will require the removal of the rear speakers. If this is a concern, please contact us at 925-292-5522 to determine if removing the speakers is required for your application.