Setrab Oil Cooler - Series 6, 7 row, M22 Ports - For additional fittings, please see Plumbing Category
| Standard Oil Cooler | Typical Application | HP
engine | ?P PSI
engine btu/hr
engine | btu/hr
diff/gb | ?P PSI
diff/gb | A | B | C | D | P/N |
| Series 6, 7 row, M22 |
|
|
|
|
|
| 13 | 11-1/8 | 2 | 2 | 50-607-7612 |
Notes:
* EOC hp and btu/hr range based on specific performance parameters that if varied may result in different performance results. Low EOC hp and btu/hr range based on typical wet sump high performance application and typical variable parameters. High EOC hp and btu/hr range based on typical dry sump high performance application and typical variable parameters. Wet Sump Parameters include: oil flow rate, 5 gpm; 20/50 engine oil or similar; 130ºF ITD; 60mphairflow. Dry Sump Parameters include: oil flow rate, 8 gpm; 20/50 engine oil or similar; 140ºF ITD; 80mph airflow.
** Trans/diff btu/hr range based on low/high set of performance variable parameters. Parameters include: Low: 0.75 gpm; Dextron II or similar; 130º F ITD; 60mph airflow. High: 1.5 gpm; Dextron II or similar; 140º F ITD; 80mph airflow.
