Tanks

BREATHER TANKS
Canton Breather Catch Tanks can be used to vent an engine, a dry sump tank, a rear end, or in any other application where a breather catch tank is required. The side port is connected to the vent line and the bottom port is used as a drain, any vapor that condenses is caught in the bottom of the tank. The pleated breather keeps any contaminates from entering the system. Comes with a petcock, and a standard1-3/8"breather, a stainless steel mounting clamp for panel mounting and a weld-on bracket which allows for rollbar mounting.

COOLANT EXPANSION TANKS

Canton's Universal Coolant Recovery Tanks and Catch Tanks can be used on coolant recovery systems by connecting the radiator overflow into the bottom port.

• Any expansion of coolant will be pushed into the tank, and when used with a radiator with a recovery cap, will return to the radiator during cool down. Plumbed this way, the tank can be used as a fill point and reservoir.
  
• These tanks can also be used as general catch tank to capture any discharge on the race track. When used as catch tanks, the side port is used as the input and the bottom port can be used as a drain. (Petcock and vented cap included.)
  
• These tanks are both light weight and strong.