Brey-Krause — Brey Krause R-1125 - Harness Mount Bar - Corvette C7

Material: Type 304, stainless steel.

Finish: Powder-coated in durable black wrinkle-finish

Weight: 17.12 lbs.

Models: C7 Coupes and Z06 Coupes
Installation Instructions

Additional Information:
The C7 harness bar presented a unique challenge. The harness holes in the Chevrolet "competition" seats are
unusually low-- too low for drivers of most heights to safely use. For example, the harness holes on the Chevy
competition seats are 4" closer to the seat bottom than they are with this Recaro seat (21" vs 25"):


That said, we didn't want to release a bar that didn't work with the factory competition seats, for those who can safely use them. Our solution was to create a harness bar with 3 possible harness mount location, all 3 of which have been tested and

certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT

and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. In so doing, we created a

harness bar that is safe to use with the stock seats, safe to use with aftermarket seats, and still allows you to keep (and use)

the factory 3 point seat belt, if you so desire.

The mounts on our C7 harness bar transmit the load from the belts directly into the factory roll hoop. The factory seat belt
bolts are still used, but their primary function is locating the bar and preventing rotation. This provides a much stronger and
more stable bar than using the seat belt bolts alone.