Your cart is empty
0
items
Subtotal:$0.00
 |
Brey-Krause — Brey Krause R-9004 - Tunnel Side Belt Mount Kit, Extra Short - Porsche
SKU: R-9004
Vehicle Specific
Check if this part fits your vehicle.
Tunnel Side Harness Lap Belt Mounting Kit, Porsche; R-9004:
Brey-Krause Lap Belt Mounting Kits allow the user to keep the factory restraint system in place for highway driving. Then when you are ready to hit the track, the R-9004 kit provides a convenient location for securing your lap belt mounts. Note: When you are not at the track, you can unhook the lap belt mounts and store them in the boot or in your track bag. You don't want to forget them when you do go to the track.
One kit provides inside (Tunnel side) mounting for driver and passenger seat lap belt mounts. Shorter length for smaller waisted occupants.
These brackets were intended for seat applications where the standard Brey-Krause tunnel-side lap belt mount (R-9001) is too long.
Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 5oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Recommended for extra-low seating applications where the R-9001 sits excessively high. One pair will work for both seats.
Note: Part# R-9002 hardware kit is required for installation in (1985-1989) model Porsches. Use part R-9003 for outside belt mount.
Click for Installation Instructions
Brey-Krause Lap Belt Mounting Kits allow the user to keep the factory restraint system in place for highway driving. Then when you are ready to hit the track, the R-9004 kit provides a convenient location for securing your lap belt mounts. Note: When you are not at the track, you can unhook the lap belt mounts and store them in the boot or in your track bag. You don't want to forget them when you do go to the track.
One kit provides inside (Tunnel side) mounting for driver and passenger seat lap belt mounts. Shorter length for smaller waisted occupants.
These brackets were intended for seat applications where the standard Brey-Krause tunnel-side lap belt mount (R-9001) is too long.
Material: Tig welded, type 304, stainless steel.
Finish: Satin Finish Stainless
Weight: 5oz.
Models: All 911, Boxster and Cayman models
Installation: Secures snap-in lap belts to factory tunnel side (inside) seat belt mounting point.
Miscellaneous: Recommended for extra-low seating applications where the R-9001 sits excessively high. One pair will work for both seats.
Note: Part# R-9002 hardware kit is required for installation in (1985-1989) model Porsches. Use part R-9003 for outside belt mount.
Click for Installation Instructions