• PHONE: (406)420-2400
  • FAX: (406)420-2399

HOURS: Mon - Fri 8:00 am - 4:00 pm PST

Browse Categories

SEMA

CM Oil Filters

CM Oil Filters are designed for superior filtration, flow and durability when compared to conventional or other aftermarket filters. CM Oil Filters feature a reusable aluminum filter body built to offer high strength and durability for years of service in a lightweight design. The element's synthetic filter is unaffected by moisture and uses depth filtration to filter down to 8 micron without the clogging and restriction common to standard surface filtration systems.

CM Oil Filters have a longer life than standard oil filters. In a normal street application the oil filter can be changed every 10,000 miles. When using a synthetic oil, the oil should be changed every 5,000 miles while the filter element should be changed with every other oil change.

Checking your oil filter element is one of the best ways to monitor your engine. To inspect your CM oil filter, remove the filter element from the housing and take the end caps off the metal cages. Slide the element out and stand it up on paper towels to drain the oil. After draining, unroll the element for inspection. During the first few inspections after an engine rebuild, debris from break-in and particles left over from the machining will show up. The amount of these contaminates will decrease over time, any major increase will indicate a problem.

Browse these categories under "CM Oil Filters"