• PHONE: (406)420-2400
  • FAX: (406)420-2399

HOURS: Mon - Fri 8:00 am - 4:00 pm PST

Browse Categories

SEMA

CM Spin-On Oil Filters

CM


LPI Racing offers CM Billet Spin-On Oil Filter P/N 25-464, 6-1/4" Long and 3/4-16 Thread.

 

CM Spin On Filter Tall

25-400 Series Spin-On Oil Filters accept CM-15 2-5/8" high synthetic fiber depth filter element which flows 15GPM of hot engine oil with no loss of pressure. The 3" dia. heavy duty lighter weight billet aluminum hosing has a blue anodized finish.


Please Use the Thread Chart to locate the correct filter for your application.

Thread Chart

Application Guide

Oil Filter Tips

CM Oil Filters have a longer life than standard oil filters. In a normal street application the oil filter can be changed every 10,000 miles. When using a synthetic oil, the oil should be changed every 5,000 miles while the filter element should be changed with every other oil change.

Checking your oil filter element is one of the best ways to monitor your engine. To inspect your CM oil filter, remove the filter element from the housing and take the end caps off the metal cages. Slide the element out and stand it up on paper towels to drain the oil. After draining, unroll the element for inspection. During the first few inspections after an engine rebuild, debris from break-in and particles left over from the machining will show up. The amount of these contaminates will decrease over time, any major increase will indicate a problem.

Sort by:
Description
SKU
Price