Corvette - Roll Bars

Roll Bars & Roll Cages

Materials and Safety
Autopower manufactures most roll bars and roll cages from seamless DOM mild steel tubing. This type of tubing is designed not to break in the event of a crash. It will deflect and bend while maintaining the integrity of the roll bar or roll cage. Adding a roll bar to your car not only provides additional protection, but can substantially add to chassis stiffness, thereby improving the car's handling characteristics.

Roll Bar Installation

All necessary installation and mounting hardware, including backing plates is included. Welding IS required to install the Autopower Roll bars in the C5 and C6 Corvette. The C6 Z06 is a bolt-in, due to the Aluminum frame of the car.

You will need to cut a small portion of the floor away for the rear support bars plates to be welded to the frame. Installation needs to be done by a qualified builder.

Autopower Paint Finishes
Most steel products are sprayed with an industrial grade gloss black cover coat for rust protection. EXPECT some paint damage during shipping. You may want to refinish products before final installation. It is best to check fit and drill all holes before you repaint. There is NO paint finish guarantee.

• Convertible top can remain in place and useable.
• This roll bar is made of 1.750 x .120 DOM mild steel tube.

• This roll bar has a bolt-in harness mount tube for easy installation of safety harnesses.
• This roll bar is made of 1.750" x .120 DOM mild steel tube.

Race Roll Bar
With the added strength of a diagonal cross brace, the Race Roll Bar is designed for solo, autocross and high speed time trials. Most Race Roll Bars also include a safety harness bar.

• This roll bar is made of 1.750" x .120 DOM mild steel tube.
• Cars weighing more than 3,500 lbs. use 2" x .120 DOM steel.

Race Roll Bar With Options
This 4 point roll bar has a bolt-in diagonal cross brace and harness mount tube.

• This roll bar is made of 1.750" x .120 DOM mild steel tube.
• Cars weighing more than 3,500 lbs. use 2" x .120 DOM steel.
• Optional bolt-in diagonal and harness tube can be ordered for this roll bar.
• Quick and easy installation and removal of these race roll bar options allows for access to the back seat for street use.
• Pictured with Adjustable Seat Brace. (Not included)

Bolt-In Roll Cage
The Bolt-In Roll Cage is designed to quickly and easily transform your street car into a race-legal competition car. This cage closely conforms to your car's interior, allowing quick entry & exit. It uses precision-fit, 6 mounting point, slip-tube and bolt-in design. It is approved by SCCA and NASA for open road racing and drifting events. The best fitting pre-fab roll cage you can buy. All roll cages made to order.

• SCCA & NASA-legal for club racing.
• Top-of-the-line in fit and construction.
• Cages are made to order, allowing for tube size and type to be selected.
• Diagonal cross brace and horizontal brace are a permanent weld-in design.
• Autopower will select tube size and type for your needs.
• Most Bolt-In Cages are made of 1.50" or 1.750" x .120 DOM mild steel tube.
• Pictured with Driver's Safety Net. (Not Included)

• 2 forward support braces
• Top windshield cross tube
• 4 door guards
  
• 4 top corner gussets

Product Notes

When ordering, specify in the "Order Notes" if your car is equipped with a sunroof or other structure that will require modification to the roll bar. Some roll bars will require the removal of the rear speakers. If this is a concern, please contact us at 925-292-5522 to determine if removing the speakers is required for your application.